Heat Shrinkable Stress Control Tubing Heat Shrinkable Stress Control Tubings are used to control high electrical stresses at insulation screen terminating point in high voltage plastic and paper insulated cable joints and terminations up to 36KV. They also control the high stresses over the connectors in joints. The Stress Control Tubings are made from thermally stabilised cross linked high Permitivity and high resistivity polymeric material. Material Specifications Product color - Black   Characteristics Value Test Methods Physical Properties Specific gravity 1.2+0.2 ASTM D-1505 / ISO1183 Water absorption 1%(max) ASTM D-570 / ISO62 Tensile strength 10 N/sqmm (min) ASTM D-412 / ISO 37 Ultimate elongation 200%(min) ASTM D-412 / ISO 37 Hardness 45+3 Shore D ASTM D-2240 Thermal Ageing Tests (120° C for 500 hrs) Tensile strength 8 N/sqmm(min.) ASTM D-412 / ISO 37 Ultimate elongation 100%(min.) ASTM D-412 / ISO 37 Thermal Tests Heat shock(30min,200°C) No Cracking / No flow ESI 09-13 Low temp. Flexibility(-40°C) No Cracking ASTM D-2671 Flammability Self extinguishing ASTM D-2671-B Electrical Properties Volume resistivity 109 Ohms-cm (min) ASTM D-257 /IEC 93 Dielectric constant 15(min.) ASTM D-150/ IEC 250 Chemical Properties Fungus resistance <1 ASTM G-21 Salt spray test No Pitting / no corrosion ASTM B-117 Chemical resistance immersion in following liquids-NaoH(40%), H2SO4(3%), Toluene, Acetone for 24hrs at room temp. Good (No visual defects) ISO - 175 PRODUCT DIMENSIONS Size Dia D T E S S Min. Max. +20% 26/12 26 12 2.0 30/15 30 15 2.0 45/20 45 20 2.5 50/25 50 25 2.5 65/30 65 30 2.5 76/38 76 38 2.5 All dimensions are in mm E-As supplied D-Internal diameter without adhesive coating Drawing depicts typical dimensions S-After free recovery L-Length as per requirement |  Products | Heat Shrinkable Components and Tubings for Power Cables |2 way LV heat shrink breakouts|3 way LV heat shrink breakouts | 4 way LV heat shrink breakouts|3 way cable breakouts(made from semiconductive material) |3 way cable breakouts(made from nontracking and weather resistant material)|Heat Shrinkable Corrosion Protection Tubings|Heat Shrinkable HV Insulating Tubings|Heat Shrinkable LV Insulating Tubings|Heat Shrinkable Stress Control Tubings|Heat Shrinkable Non tracking Tubings|Heat Shrinkable Semi conductive Tubing|Heat shrink Creepage Extension Sheds(CES) & Strain Relief Sheds(SRS)|Heat Shrink End Caps|Heat Shrink wraparound sleeves| Heat Shrink In-Line and Right Angle Boots|Composit Support Insulator| Heat Shrinkable Joints and Terminations for Power Cables |Indoor & Outdoor terminations for 3core & 1core XLPE and paper Insulated MIND cables|Joints for 3core & 1core XLPE and paper Insulated MIND cables up to 36KV|Terminations & Joints for 1,2,3 and 4core PVC, XLPE and Paper Insulated cables up to 1.1KV| Heat Shrink Telecom Joint System For Telecommunication Cables |Heat Shrink Telecom Closures/Joints|Branch off Kits|Branch off Clips|Cable End Caps with/without valves|          |Re-entry Kits|